Bosch to build the concept of industrial 4.0 Changzhou Wujin factory opened in April 2017. In line with the three major trends in the global automotive industry, automation and electrification, the newly built Wujin plant will provide electronic products Sensor and services for auto driving and interconnection in the Chinese market, such as camera and radar sensors for driver assistance systems, For the car network market to provide central gateway and other interconnection products, but also to provide automotive electronic power steering system controller. Whether it is the production of automotive electronics itself or its paperless office and intelligent logistics production system are inseparable from the sensor figure. The production of some of the automotive electronics sensor products in addition to the automotive industry supply will also be used to other industries to help them achieve intelligent factories. Bosch Group in its 2016 held in the 'Internet technology to Jane experience' in the press conference had stressed that the sensor is the eyes and ears of the Internet world. Then the sensor in the body of the electronic system is equivalent to the application of ADAS brain. TE, a global leader in connectivity, is also actively acquiring sensor systems to complement its system of better-perceived pressure and temperature. There are many examples are no longer enumerated, which are precisely that the sensor in the automotive world of access to the much attention of the favor.
Even as a representative of the sensor leader Bosch, in its future factory to build the pattern in addition to intelligent sensor development, but also can not ignore the ability of software development, but also stressed that Bosch also committed to become a service expert in this area. The sensors in the interconnected car carry out their duties, both the image recognition and temperature and pressure and monitoring sensors and other different adaptation range. Continental's 360-degree panoramic camera system boosts the future of automatic parking technology, the system uses 360-degree panoramic system rear view camera to prevent the reversing process of the collision. For example, its wide aperture angle even allows observation of corners of the parking space. In addition, the camera can also detect white parking Fuel Rail Pressure Sensor space boundary line, which is the traditional ultrasonic sensor can not do. The technology integrates infrared, radar and laser radar and many other technologies, and with the man-machine interface technology together, but also for the future combination of different technologies to achieve a variety of new features provide unlimited possibilities. This intelligent camera system, its components in a variety of environments, such as from -40 degrees to +85 degrees, must work properly in order to make the camera to capture the information used by the calculator precision, the mainland group on the camera function standards Very strict, and the market compared to the common fisheye camera there is a big difference for the future to achieve automatic driving has laid an important foundation. The system's four fisheye cameras are installed in the car's front grill, rear, two outer mirrors on the base of each one. Each camera's angle is greater than 180 degrees, so the four cameras can be integrated into the entire car around the 360-degree panoramic picture. However, the problem is that if one of the fisheye camera failure, although this probability is very low, then the so-called 360-degree panoramic picture will be limited, so the future may have a more integrated sensor-based application technology Development come out.
Since the interoperability of course, inseparable from the sensor assistance, with the use of the sensor increased, but also related to the connection and other supporting the use of components related Temperature Sensor to the problem, the sensor as a car interconnected system key components Play its value, not just an independent individual.